Wedemic

Cisco CCNA (200-120): Soon to be (200-125): The Complete Course

This course will give you everything you need to prepare for the Cisco, CCNA (200-120) soon to be the Cisco (200-125): The Complete Course certification exam.

0 STUDENTS ENROLLED

     

    Course Description:

    This course is over 24+ hours in length (for now) and will cover all the needed subjects to be successful in passing your CCNA 200-120 exam and/or the (200-125). Let me explain:

    This course is updated to reflect everything you need for Cisco’s new certification CCNA (200-125) certification exam!

    Students will acquire the knowledge and practice labs in this course to make it transferable to real world use as a Cisco and or IT Professional.

    DISCLAIMER: Please note that the simulators/emulators used in this course are not part of the course. It is the students responsibility to have these to practice with. The Cisco Packet Tracer & VIRAL (Virtual Internet Routing Lab) are Cisco proprietary software and can only be obtained through Cisco. It is up to each student to obtain the simulator/emulator of their choice to study along with this course.

    This course will give students an in-depth understanding of networking, using routers and switches and their various configurations and connections. Students will learn how to configure; default, static and dynamic routing. Students will comprehend how to manipulate each of the routing protocols attributes to meet the requirements of the network.

    This course will also prepare the student in Layer 2 technology and its various configurations, such as; VLAN’s, VTP, STP, PortFast, EtherChannel, Port-Security, Inter-VLAN communication & Trunking; plus the newest requirements for the CCNA (200-125) certification exam as well.

    Students will also acquire the knowledge needed to secure their routers through the use of Access-list, configuring the different types of NAT & will be able to manage the router’s components.

    Students will also be able to thoroughly grasp the concepts of both Internet Protocols; IPv4 & IPv6.

    Wide Area Network Protocols will also be covered; HDLC, PPP & Frame Relay. The student will also learn how to create redundancy in their networks through the use of Redundancy Protocols such as HSRP which is just as important. Also, within the WAN, the student will also learn how to create VPN’s and GRE Tunnels.

    This is a full comprehensive course that will take you from A-Z in your quest for the CCNA (200-120)…and the soon to be the 200-125 as well.

    About “the book”:

    Throughout the course, you will hear me mention “your book”, “a book” or “the book”…and if you’re wondering why I don’t mention a name…it’s because this was done on purpose.

    I don’t want anyone to purchase a book if you already have one…all CCNA study guides cover the same thing in different manners. So if you already have a CCNA book, you can use it with this course.

    However, for those that wonder which book I use and/or mention in this course…I can tell you that it’s the Sybex CCNA Study Guide by Todd Lammle for the 200-120. (the book is not mandatory, but highly recommended).

    Todd Lammle will have a new book to out for the CCNA (200-125). Which will be available on AMAZON.

    Also, I have created a free Dropbox for all my students that includes practice labs and other stuff that will be useful to prepare for the CCNA exam. Since I cannot post the link here (not allowed), just go thought some of my announcements and you will find the link there.

    Hope you enjoy the course!

    Laz 😉

    DISCLOSURE: I do not know Todd Lammle, I do not get referral fees and/or any compensation from him or Sybex, I just happen to think that his books are much easier to understand and follow. It is up to you (the student) to decide which book, if any, you want to use along with this course.

    READ MORE

     

    Requirements:

    • Basic understanding of Networking
    • Cisco Packet Tracer or similar simulators
    • A CCNA Study Guide book would be helpful
    • Desire to pass the CCNA certification exam

     

    What Will You Get From This Course:

    • This is a complete & comprehensive CCNA (200-120) Course. It is designed to prepare the student to be able take the certification exam.
    • Once you finish this course, the student will not only have the confidence to take and be able to pass the test, but they should be able to transfer the knowledge acquired to a networking environment.
    • Understanding the concepts as provided in this course is an essential part of any network in order to communicate and transmit information. Mastering this knowledge will make the student or IT Professional a much more valuable asset in any Network or IT environment.

     

    Who Should Take This Course:

    • This course is intended for anyone that is preparing for a network certification or Computer Science Degree. However, it does go beyond that, it is also intended for those Networking and/or IT Professionals that are already in the field and need a better understanding of networks.
    LESS

    Course Curriculum

    Section 1: Welcome to the most COMPLETE CCNA (200-120) Course...get ready to be Amazed!
    Journey into Cisco World FREE 00:02:01
    Why acquire A CCNA Certification 00:02:58
    How would you get CCNA Certified 00:04:13
    Which CCNA test should I take? 00:06:33
    What does the course consist of? FREE 00:06:22
    Section 2: The packet tracer simulator
    Navigating the packet tracer tool FREE 00:30:00
    How to create a simple topology 00:06:46
    Configuring a router 00:03:21
    Configuring a switch 00:06:13
    Configuring a PC 00:06:24
    Configuring a server 00:05:34
    Section 3: The basics of networking
    Understanding the need for Networking 00:04:42
    Communication at its lowest layer 00:10:13
    Internetworking Devices used on a network 00:20:36
    The importance of segmentation 00:10:36
    Section 4: The OSI Model
    A brief history of the OSI model FREE 00:02:52
    The layers of the OSI model 00:06:46
    The 3 upper layers of the OSI 00:08:07
    The 4 lower layers of the OSI 00:07:00
    The Process of Encapsulation 00:02:43
    Section 5: Binary to Hex and Decimal Conversion
    The tables we use when converting FREE 00:04:19
    Converting a hex number to binary:decimal 00:10:25
    Converting a decimal:binaryhex 00:06:25
    Why do we need to know hexadecimal numbers? 00:02:40
    Section 6: Cisco Three Layer Model
    Core layer 00:04:31
    Distribution layer 00:04:12
    Access layer 00:05:57
    Section 7: TCP/IP Model
    A brief history of the model 00:04:12
    The layers of the model and how they map over to OSI 00:04:45
    Section 8: Ethernet Networks
    Definition of Ethernet 00:07:10
    The access method of ethernet 00:10:28
    What cabling standards do we use? FREE 00:12:06
    Section 9: IPV4 Addresses
    What is an IPv4 address and its format 00:09:24
    Classes of address and their ranges 00:16:04
    Section 10: Private IP Address Range
    Definition of private addressing 00:05:04
    Private class A,B,C address ranges 00:14:48
    Section 11: IPv6 Addressing
    Why do we need IPv6 FREE 00:06:13
    IPv6 addressing and expressions 00:13:12
    IPv6 address types 00:10:04
    The auto-configuration feature 00:10:24
    ICMPv6 00:05:25
    Section 12: Transition Mechanisms
    Dual Stack, 6to4 tunneling and NATPT NR 00:13:30
    Section 13: How to subnet in IPV4
    The subnet mask 00:18:01
    The diagram we use to subnet 00:18:10
    Class full subnetting 00:09:36
    Class less subnetting 00:21:10
    Route summarization 00:23:45
    Wildcard masking 00:11:30
    Section 14: How to subnet in IPv6
    Do we need to subnet in IPv6? FREE 00:03:36
    How to setup the diagram for subnetting 00:04:58
    Counting for subnets and finding increment value 00:04:49
    Laying out the subnets with new network prefix 00:04:43
    Section 15: Inside a Cisco Router
    How to connect to a router 00:08:52
    Components we need to know about 00:16:37
    Boot Sequence of a Cisco router 00:09:19
    Navigation of the IOS 00:12:58
    Section 16: Administrative Configurations
    House keeping configurations 00:30:28
    Interface configurations 00:16:58
    Telnet and SSH into routers 00:05:52
    Show commands 00:08:07
    Section 17: DHCP and Name resolution on Cisco Routers
    Configuring DHCP 00:14:43
    Configuring DHCP relay agent 00:19:52
    Configuring static host table 00:09:33
    Section 18: Using the Cisco Discovery Protocol
    Using the CDP command 00:09:34
    Section 19: The Cisco register
    Manipulating the register within the router 00:10:36
    Accessing & manipulating the register within ROMMON 00:12:15
    Section 20: Routing Process
    How does IP routing occur 00:13:36
    What type of routing should i use? 00:09:55
    What are default routes and where do you configure them? 00:16:36
    Configuring static routes on real routers FREE 00:11:00
    Section 21: Dynamic Routing
    An overview of the three Dynamic routing protocols 00:19:49
    RIPv2 & RIPng configurations NR 00:49:22
    EIGRP & EIGRPv6 configurations NR 00:48:46
    EIGRP Bandwidth Lab 00:17:49
    Section 22: OSPF Details
    OSPF Terminology 00:21:19
    Point-to-Point OSPF 00:29:21
    Multi-access ospf NR 00:48:04
    OSPF multiple area details 00:22:31
    Section 23: Switching at layer 2
    Purpose of using switches 00:17:37
    Navigation on a switch and show commands 00:14:00
    Administration configurations 00:08:34
    Section 24: The Basics Of VLANs
    What are vlans and the importance of using vlans in our network? 00:11:09
    How to create and assign a vlan :Trunking appropriate ports 00:16:16
    Section 25: The Spanning-Tree Protocol
    What is STP used for? 00:06:15
    How does the STP election process work? 00:21:55
    How to manipulate the election process 00:08:28
    Turning STP off and Guarding against BPDUs on ports not using STP 00:10:52
    Section 26: The Virtual Trunking Protocol
    What is the purpose of the VTP protocol 00:12:36
    Commands and Configurations of the VTP protocol 00:14:22
    Turning on and adjusting port-security on your switch 00:07:07
    Section 27: Inter-vlan routing
    What is the purpose on intervlan routing 00:11:55
    How to configure intervlan routing 00:34:07
    How to configure intervlan routing 00:22:37
    Section 28: Secure your enterprise using ACL's
    What is an ACL and its rules 00:12:55
    Standard ACL’s 00:20:25
    Extended ACL’s 00:25:49
    Section 29: Network Address Translations
    3 types of NAT 00:07:31
    How does NATs work 00:06:19
    Configure NAT Overload and Dynamic 00:07:52
    Actual Configuration of NAT Overload 00:07:30
    Pitfalls of NAT in CERT 00:05:43
    Section 30: Wide Area Networks
    What exactly is a WAN 00:07:13
    What are the connection types and how to justify it 00:11:22
    Section 31: Frame-Relay Packet switched technology
    Understanding the CIR and Burst Rate 00:12:39
    What is a DLCI and who assigns it 00:09:27
    Configuring frame relay 00:24:55
    Show commands frame relay 00:09:18
    Section 32: PPP Dedicated leased connection type
    Dedicated leased connection type 00:07:37
    PPP configuration 00:15:58
    Section 33: IP services
    Redundancy protocols overview 00:12:37
    HSRP Detail and Config NR 00:43:45
    VRRP and GLBP 00:09:39
    Section 34: Managing Devices
    SNMP 00:21:54
    SYSLOG 00:11:43
    NETFLOW 00:08:34
    Section 35: Summary of the course
    The Summary 00:06:25
    CCNA 200-120 Final Exam 01:00:00
    Section 36: New Section Explaining EtherChannel
    Introduction to EtherChannel 00:00:43
    What is EtherChannel? 00:03:49
    EtherChannel Lab 00:12:43
    Summary of Section 00:02:30

    Course Reviews

    N.A

    ratings
    • 5 stars0
    • 4 stars0
    • 3 stars0
    • 2 stars0
    • 1 stars0

    No Reviews found for this course.

    TAKE THIS COURSE
    • SGD 149 SGD 90
    • UNLIMITED ACCESS
    • 121 Units
    • 1555 Minutes
    • Wishlist

    Enrol With Confidence


    PayPal Acceptance Mark

    Registration Support

    If you require further assistance on registration matters, email to registration@wedemic.com

    In-House Enquiry

    Achieve higher ROI with your training budget with In-House trainings, email to inhouse@wedemic.com
    If you are tired of the same old methods of learning and want someone that is pretty much unconventional, but at the same time will provide you with an enjoyable learning experience in layman's terms...then please preview my courses and you will discover that I am your guy. I am a Network Engineer with over 14+ years in the field and in the teaching industry. I hold the following certifications: CCNA, CCNA Security, CCNA Voice, Security+, Network+, A+, MCP, MCTS & MOS and I just passed the first of two test for the CCIE! My teaching experience stems from teaching at institutions like Palm Beach Community College, New Horizons, Florida Career College (now Anthem College) and The Academy of South Florida, not to mention teaching at my own training facility in Miami, Florida. Having been in all sides of the spectrum; as a student, a teacher/trainer, and in the field, I believe this uniquely qualifies me to understand the student, and what they have been exposed to as opposed to what they really want to accomplish. These two are sometimes extremely conflicting and frustrating. That is why I teach in the manner I do and can relate to the student's rejection of the Status Quo. I have taught corporate employees at MetroPCS (now T-Mobil) and have also taught IT professionals of companies like The Florida Marlins, Hospital personnel & Attorney's firms amongst others to be able to acquire their CCNA certification and/or their Microsoft certifications; like the MOS (Microsoft Office Specialist). YES!...I am also an applications instructor and also teach Word, Excel, PowerPoint and Access. I teach in an unconventional way that allows for students to understand the subject matter and can therefore, not only prepare them for a Cisco and/or Microsoft certification exam, but apply my methods in the real world. I strive to give the student a greater opportunity to compete in the current job markets. Do I go above and beyond what is needed for a certification?...YES, I do!...because it's not only about getting a certification, it's also about making sure the student is prepared for a job interview and/or maintaining their current job by enhancing their skills. This is where I step in and make sure that the student is prepared for whatever they need and make them an asset to their employer. Everyone has different requirements and I make sure, or at least I try, to provide information for most scenarios. My classes and/or courses are very simple and that's how I like to teach. If things are kept simple, easy and explained in a way that the student can grasp quickly and retain the information...then I have achieved my goal! For those that do not know me yet, you may not be used to my style of teaching, but you will soon get accustomed to it :)... I'm very laid back, I try to make learning fun and I teach in layman's terms...no physics jargon or mumbo jumbo in my teachings. My courses are very interactive and extremely dynamic!...you will not find my lectures monotone or boring, because falling asleep, for lack of excitement, is just NOT an option. Just take a look for yourself at my video previews, which I always provide on ALL my courses, so you can determine if I'm the right guy to help you get your industry specific certifications. ;) I certainly hope that after a careful review of my credentials & testimonials (you can Google it you know!), I'm the Cisco & Microsoft Instructor you're looking for! Laz Network Engineer, Motivational Evangelist, Author, Cisco & Microsoft Instructor
    More Courses by Lazaro Diaz